 |
 |
|
UN II/ 26 E3 |
UN II/ 42 E3 |
Unicus II Cylinder Recharging Station is the total system for recharging high or low SCBA or SCUBA cylinders. The integrated system design combines a BAUER four or five stage high pressure compressor, BAUER breathing air purification system, air storage system, cascade fill panel and containment fill station into one user friendly workstation. Independently tested for safety, a UL listed electrical assembly and the proven reputation for superior performance makes the Unicus II the most advanced fill station available.
|
|
|
UN II/ 26 E3 |
UN II/ 42 E3 |
STANDARD FEATURES 5000/ 6000 PSIG
Stainless steel gauge panel.
Hinged stainless steel cascade fill control panel with laser cut directional fill schematic.
Emergency stop switch.
UL listed electrical assembly.
Three position containment fill station.
Fill station accommodates SCUBA cylinders up to 30" in overall length.
Inlet filter maintenance indicator.
Automatic condensate drain system.
Condensate reservoir with automatic "Full" indication.
Compressor low oil pressure and high temperature safety shutdowns with panel mounted fault lights.
Two (2) ASME code stamped air cylinders installed in an integral rack designed for four (4) cylinders.
Sound attenuating enclosure with slam-action latches and lift-off hinges.
*Based on recharging an 80 cubic foot tank from 500 to 3000 PSIG. **Compressor capacity referenced to standard inlet conditions. + Purification supplied separately for remote mounting. E3=Three phase electric, 230/ 460 VAC/ 60 Hz. Other voltages available on request. Dimensions and weights are approximate and are subject to change. |